Via The Hindu
Certain plastic wastes can soon help fuel your cars. Researchers from IIT Guwahati have successfully converted packaging plastic waste to plastic-derived oil (PDO), which has characteristics similar to diesel.
Low- and high-density polyethylene (LDPE, HDPE) and polypropylene are commonly used as packaging materials and end up in the waste stream. According to a 2016 Central Pollution Control Board report, almost 15,000 tonnes of plastics waste is generated per day in India.
The researchers collected the waste (biscuit wrappers, shopping bags, food containers, shampoo bottles) from houses, cleaned and segregated them according to the resin identification code. These codes on plastics indicate the type of plastic resin it is made of.
Using a semi-batch reactor, the different wastes were heated for six to seven hours at 300-400 degree Celsius. “Heating at very high temperatures in inert conditions caused the plastic to convert into wax, so we chose this particular temperature range in which the plastic turned to plastic-derived oil and stayed in its oil state,” explains Pallab Das, PhD scholar at the institute and first author of the paper published in Resources, Conservation and Recycling.
But burning plastic waste generates pollution, particularly dioxins which are toxic to humans. “There is no oxygen in the three plastic wastes that is heated that we are also not supplying any oxygen. Pyrolysis is done under inert conditions. Only hydrocarbon gases such as methane, ethane and propane were produced and there was negligible amount of carbon dioxide and carbon monoxide produced,” says Das.
Further research
“More experiments need to be carried out to get a trade-off between the quality of the oil and the environmental pollution caused by the pyrolysis process. We are working on this and hope to create an ideal operating condition which can provide high-quality oil with less pollution,” says Dr. Pankaj Tiwari, Assistant Professor, IIT Guwahati, and corresponding author of the paper. “Compared with combustion, pyrolysis causes less pollution.”
The researchers then studied the properties of the new plastic derived oil. One of the oil samples from polypropylene showed a high research octane number of approximately 92. Octane number indicates the quality of the gasoline range fuel. Premium petrol has research octane number of 98 to 100.
The oil also showed low viscosity and had high calorific value. Calorific value denotes the amount of heat generated when unit amount of sample was burnt with oxygen supply. The new oil had calorific value greater than 45 MJ per kilogram. Calorific value of petrol and diesel is 46-48 and 44-46 MJ per kilogram, respectively.
“We are yet to carry out engine tests. Once tested, these oils can soon find application in transport and industrial sectors,” says Dr. Tiwari.
For more details click here
Share:
0 comments:
Post a Comment